這個是麥克勞德幫助文件里的說明：Dynamic Tooling Factor: Reset for each Layer when cleared and the tooling factor is read from a table file then the tooling factor will be a function of the accumulating thickness of layers of the appropriate source. This simulates the gradual depletion of material from the source as coating deposition proceeds. There may be circumstances where the tooling factor should be a function of the individual layer thickness only. This will be selected when the box is checked. Then the accumulated thickness is set to zero at the start of each layer. This option applied only if tooling factor tables are in use. I3PQdAs~&h )T/J 大意是說：用來模擬鍍膜過程中材料損耗造成的影響。
cgw808670
2022-02-27 22:22
外語對我來說，真難
與日月兮齊光
2022-03-10 09:01
ouyuu:這個是麥克勞德幫助文件里的說明：Dynamic Tooling Factor: Reset for each Layer when cleared and the tooling factor is read from a table file then the tooling factor will be a function of the accumulating thickness of layers of the appropriate source. This simula .. (2022-02-23 19:37) ;W6-i2?
，謝謝啦